ISU Audio & Arduino Clubs
Cyduino – Bill of Materials
- Kits are available from IEEE — contact the current IEEE representative, listed on the About page.
- The BoM includes everything needed to make the Cyduino PCB. A DC source with a 2.1-mm barrel plug is needed to power the circuit. The voltage should be bigger than 6 V — a 9-V battery works nicely, or the DC-supply project can be used.
| item | Manufacturer p/n | Digikey p/n | quantity | item cost | total |
|---|---|---|---|---|---|
| Microcontroller | Microchip ATMEGA328P-PU | ATMEGA328P-PU-ND | 1 | 2.89 | 2.89 |
| Socket | On Shore ED281DT | ED3050-5-ND | 1 | 0.35 | 0.35 |
| 16-MHz crystal | ECS, Inc. ECS-160-20-46X | XC1759-ND | 1 | 0.37 | 0.37 |
| 22-pF capacitors | Vishay K220J15C0GF5TL2 | BC1005CT-ND | 2 | 0.23 | 0.46 |
| 10-kΩ resistors | Stackpole CF14JT10K0 | CF14JT10K0CT-ND | 3 | 0.10 | 0.30 |
| 0.1-uF capacitors | Vishay K104K15X7RF5TL2 | BC1084CT-ND | 3 | 0.25 | 0.75 |
| 5-V regulator | STMicro LD1117S50TR | 497-6447-1-ND | 1 | 0.50 | 0.50 |
| 10-uF capacitor (16 V) | Panasonic ECE-A1CKS100I | 10-ECE-A1CKS100ICT-ND | 1 | 0.24 | 0.24 |
| red LED | Lite-On LTL-4211 | 160-195-ND | 1 | 0.19 | 0.19 |
| 1-kΩ resistor | Stackpole CF14JT1K00 | CF14JT1K00CT-ND | 1 | 0.10 | 0.10 |
| OLED display | Hosyond (from Amazon) | Amazon | 1 | 3.00 | 3.00 | screw - 2-56 x 3/8 | Essentra 010256F037 | RPC7524-ND | 4 | 0.11 | 0.44 |
| nut - 2/56 | Essentra 0400256HN | RPC7088-ND | 4 | 0.15 | 0.60 |
| stand off - 2/56 | Bivar 9913-125 | 492-1042-ND | 4 | 0.10 | 0.40 |
| ICSP header | Sullins PEC03DAAN | S2012E-03-ND | 1 | 0.47 | 0.47 |
| momentary switch | Omron B3F-1000 | SW400-ND | 1 | 0.24 | 0.24 |
| 2-pos screw terminal | On Shore OSTVN02A150 | ED10561-ND | 2 | 0.87 | 1.74 |
| 3-pos screw terminal | On Shore OSTVN03A150 | ED10562-ND | 1 | 1.26 | 1.26 |
| 4-pos screw terminal | On Shore OSTVN04A150 | ED10563-ND | 2 | 1.63 | 3.26 |
| 6-pos screw terminal | On Shore OSTVN06A150 | ED10565-ND | 2 | 2.35 | 4.70 |
| barrel jack | CUI PJ-102AH | CP-102AH-ND | 1 | 0.76 | 0.76 |
| bumpers | Bump Spec B25BL07X30RP | 2042-1053-ND | 4 | 0.05 | 0.20 |
| PCB | from IEEE | 1 | 2.00 | 2.00 | |
| Total | 25.10 | ||||